Read your paint labels

How to read acrylic paint pigment codes for mixing

A recipe says ultramarine, but your paint box contains three different blues. Which tube should you use? Acrylic paint pigment codes help you compare the actual colorants rather than relying only on a color name. Learn to read the code, check what else is in the tube, and make a small comparison before changing a recipe.

By 6 minute read
PB29 separated into P for pigment, B for blue and 29 for its Colour Index identity; a code identifies a pigment, not a mixing ratio.
An illustrated code decoder, not a photograph of a paint label or a tested color swatch. Read the complete pigment list and the separate opacity information on your own tube.

Start here

What do acrylic paint pigment codes mean?

A code such as PB29 is an abbreviated Colour Index pigment name: P means pigment, B indicates blue, and 29 identifies that entry. It does not mean 29 percent pigment or tell you a mixing ratio. One listed code indicates a single listed pigment; several codes indicate a blend. Compare the whole list, then check opacity and test the paint you actually own.

Pigment code reference

Read the letters before the number

These prefixes identify pigment groups. The example numbers identify particular entries, not their strength or price.

PrefixPigment groupExample code
PWWhitePW6
PYYellowPY35
POOrangePO34
PRRedPR112
PVVioletPV19
PBBluePB29
PGGreenPG7
PBrBrownPBr7
PBkBlackPBk11

Prefix examples follow Royal Talens’ Colour Index explanation. A pigment group is not a promise of the exact color you will see in a tube or mixture.

01

Find the pigment list, not just the product number

Look for Pigment, Pigment Code, C.I. Name or Colour Index on the tube or the manufacturer’s technical chart. Keep the brand and paint range beside that list. A shop’s color number, barcode and series number are different fields; none substitutes for the pigment identification.

For example, Liquitex lists Basics Unbleached Titanium with color code 434 but pigment codes PBk11, PR101, PW6 and PY42. Copying only 434 into a recipe would miss the four listed pigments. If the tube does not show a code, check the exact product’s official page rather than guessing from a similar color in another range.

02

Decode the letters and keep the full number

Use the prefix table to distinguish PB, meaning blue, from PBk, meaning black. Keep upper- and lowercase letters clear in your notes. The Colour Index describes its generic names using a usage class, a hue group and a serial number. That number identifies an entry; a higher number does not mean a stronger, better or darker paint.

Preserve any colon and the digits after it when copying a code. The Colour Index uses these suffixes for related colorants with differences that can include chemistry or crystal form. Do not shorten a label just to make two paints look equivalent. When the details are unclear, keep the original label photograph with the recipe.

03

Compare single-pigment colors with convenience blends

A single listed pigment makes the ingredient list easier to follow. A blend can still be useful, especially when it already gives you a color you use often. Count the listed codes before adapting a recipe, rather than treating every named tube as one pigment.

GOLDEN’s Fluid chart lists Ultramarine Blue as PB29 and Light Ultramarine Blue as PW6 plus PB29. The second is already a blend containing a white pigment. Its name alone would not tell you that. The same chart lists Quinacridone Red and Quinacridone Violet as PV19, showing why the pigment-group letter and the paint’s marketed color name need to be read together.

These are product-specific examples, not a rule for every brand. A single-pigment paint is not automatically the best choice for every passage, and a blend is not automatically muddy. Choose the tube for the role you need, then check how it behaves with the other paints in your palette.

04

Read opacity and lightfastness as separate information

A pigment code identifies a colorant; it is not the paint’s opacity rating. Manufacturers provide separate opacity and lightfastness information. GOLDEN’s label explanation places those fields alongside the Colour Index name. Use the legend for your own brand to interpret a square, a letter or a rating instead of assuming all packaging uses the same symbols.

For a transparent passage, compare the paint’s opacity information before copying a recipe made with another range. For a covering passage, make a small stroke over a light and a dark area on a spare prepared surface. Treat this as an observation of that paint at that thickness. Record what you see rather than changing the pigment code to describe the result.

05

Test a substitution before scaling up the mixture

A shared code gives you a useful starting point for comparison, but it does not specify the entire paint formulation or a universal recipe ratio. GOLDEN’s mixing guide describes unequal tinting strengths within its palette, with phthalo colors requiring small additions. Its tint-chart explanation compares colors in a fixed white-to-color mixture. Those references illustrate why equal-looking blobs are not a reliable substitution rule.

Set aside the target recipe and name the role of the tube you are replacing: a blue foundation, a lightening white or a small neutralizing addition. Start with a small fresh mixture using the substitute. Add the modifying color gradually, spread a test, and compare it with the intended target after it dries. Keep a portion unchanged so you can tell which addition caused the difference.

06

Make a three-swatch comparison with two tubes you own

Choose two paints you are unsure about and write down each brand, range, color name and complete pigment list. Give them simple identifiers, A and B, so you do not confuse the samples while mixing. Use a spare surface prepared like the painting and label the rows before applying paint.

In each row, place one small full-strength stroke, one thin brushed-out stroke, and one tint made with the same white and the same chosen measurement method. Use equal measured portions for the comparison, not because they should make equal colors, but so you change only the paint being compared. Clean the tool between rows.

Let both rows dry under the same conditions. Note the differences that matter to your painting: hue direction, lightness, coverage and how strongly each paint colors the white. This exercise does not prove a universal property or an exact match. It gives you a practical reason to choose one of your own tubes for the next small trial.

07

Save a recipe that someone can actually repeat

Write more than “blue plus white.” Include the exact tubes, their pigment lists, the parts or measurement method, any medium, the surface and the dry result. If you change brands later, keep the earlier entry and add a new trial rather than silently replacing its ingredient name.

For a mixing chart, use those tube identifiers on both axes and keep the label notes beside the grid. For a recipe suggested by Mix Therapy, select the paints you own and treat the result as a starting point. The dry swatch remains the check. The related chart and limited-palette guides show how to turn these notes into a manageable painting practice.

Troubleshooting

Common paint-label mistakes

Resolve the missing information before buying another tube or making a large batch.

What you seeWhat to checkUseful next step
PB and PBk look similarBlue versus black prefixCopy the full code with clear lettering.
Same name, different mixturesFull pigment list and rangeCompare the exact tubes in a small trial.
A light blue replaces a dark blueWhether white is already listedReassess the recipe’s lightening step.
No code on the containerOfficial product chartKeep identity unknown until verified.

Free studio printables

Record the test instead of guessing again.

Use the worksheet beside the palette, then keep the dry result with the painting notes. Each PDF is free, low-ink and formatted for US Letter paper.

See both printables and the full method

Sources and product references

Studio questions

Questions painters ask

What does PB29 mean on acrylic paint?

PB29 means Pigment Blue 29, the Colour Index identification associated with ultramarine. It is not a mixing ratio. Check whether the tube lists PB29 alone or alongside other pigments.

Is a pigment code the same as a color number?

No. A brand’s color number identifies its product or shade. The pigment list identifies the listed colorants. Save both when documenting the exact paint used in a recipe.

Are single-pigment acrylic paints always better for mixing?

No. They can make an ingredient list easier to understand, while convenience blends can save work for colors you use often. The right choice depends on the intended mixture and the behavior of the paints you own.

Can I swap brands if the pigment codes match?

Use matching codes as a starting comparison, not proof of identical handling or proportions. Check the complete list and opacity, then compare a small dry swatch before scaling up.

Does the pigment code tell me whether paint is transparent?

No. Read the separate opacity or transparency information supplied for the exact product. Confirm coverage on the surface and at the thickness you plan to use.